櫻 Sakura 艦底追加改造製作記 松型驅逐艦是日本海軍在戰時所建造的驅逐艦中最晚規劃,同時也是噸位最小的驅逐艦.日本海軍將其規類為所謂戰時急造艦型的 丁型驅逐艦 . 櫻(Sakura)則是丁型驅逐艦中的第13號艦. 本次的作例純粹是心血來潮之作,某日看著資料中丁型與改丁型的線圖,心想像這種接近海防艦尺寸的小驅逐艦,若與"敷波"同樣具備全艦底,勢必在視覺效果上更形精巧細緻.於是,拿著桌上不時準備的木條就開始動工了! 與以前小弟慣用的模式相同: 1.水線板在木條描繪出輪廓. 2.切除多餘的部份(以往都是以手鋸做切割工作,不過這次為了搶時間動用了4"手提砂輪機+砂布輪直接用磨的,後來艦艏還磨過了頭,還好用膠板和補土補回來了!) 3.將雛形直接以快乾黏死在艦身水線下. 4.不斷的補土打磨,再補土打磨.最後以水補土噴漆檢查,瑕疵的部份再打磨或細磨,再噴水補土檢查,如此反複直到完美. 當然在塑型的時候要參考線圖做正確的構型判斷. 以下是照片摘要: 下面2張圖可以看的出來水補土與艦底木頭,和艦艏補過的痕跡 丁型與改丁型最大的差別(也就是松型和橘型的差別) 上面是丁型改,下面是丁型. 打磨的差不多了,目前的狀態. 艦艏底部切了個小斜角,這是丁型的特徵 第2階段: 舷窗鑽孔 艦底二舷穩定鰭片追加 大軸,軸承座與軸承支架,舵面追加 大軸角度修正 前次所做的大軸角度經過資料的仔細判讀,修正至目前的狀態.這個角度以有限的資料來說,已經是"雖不中亦不遠矣.目前就維持這樣吧!至於車葉,經過判讀,縮小到1/700的葉面尺寸為3.78mm.目前並無可資利用的現成套件可供直接安裝,仍是必須自製.這個部份就留待艦體修整工作的最後階段再來做囉.
TO:RALPH大
回覆刪除機尾擦地了 ^o^
Beautiful aitcraft, is not it?
回覆刪除Do some posthading (try thinned smoke colour) before wash in order to make deeper look and current "flat" surface distortion! Follow panel-lines. I would try to add some drybrush on panel-lines too.
(Yes, I am pupil of Spanish school - I do not not believe, that small object can do the same deep shades as real thing....)
One question - there aro no blue-white "chinese suns" on wings?
Cheers!
松尾明兄
回覆刪除機尾著陸撬暫且取下,另外要噴成黑鐵色的~^^~
Dear David:
You are right!D.510 has the special charm to a propeller-plane.
Thanks for your nice suggestions,that's a very good idea!I'll try it ! ^_^
"(Yes, I am pupil of Spanish school - I do not not believe, that small object can do the same deep shades as real thing....)"
I'm so sorry, I don't understand what you mean about sentence above.You mean......what doing about our bad guy,President Chen? ^^||
About your Q.No, "chinese suns" appear under the main-wings,not on wings.
Very thanks for your care and reply,I will go on as my best.
Have a nice day~
p.s. How about your ship-kit product line?
I will try to explain my strange sentence (not about your president!):
回覆刪除Czech modellers are split to two groups:
1/ First group (Spanish school - Miguel Jimeney or Villalba etc...) using the latest "modern" methods on surface - riveting, pre-shading, postshading, wash, drybrush etc... They do it in order to make surface of model more deep, more plastic, more interesting
2/ Second group (caled "toy makers" or "plastic duck makers" focus more on accuraccy, they compare each model with plnas and looking for every 0,1mm difference. But they do not care about surface - no wash, no shades, very clean surface - result is "plastic duck toy". Their are very often saying, that "model will create his own shaeds and surface plasticity"
Of course, on our main discussing forum both groups fight for their own ideas. Sometimes very hard and very rough words used against "enemies".
I hope now is my sentence about "creating of shades" more clear.
Cheers!
こんにちは。
回覆刪除Ralphさん、久しぶりです。
台湾では、79%の人が「台湾」と言う名称で国連加盟(連合国加盟)を
望んでいる様ですね。
Ralphさんは、如何ですか?
台湾は、親日派が多い事から日本でも台湾に親近感を持つ人は多い。
私は、アジアの友として日本と台湾の友好が継続する事を希望する。
台湾国名義での国連加盟(連合国加盟)申請を私は支持します。
・・・・・
http://www.youtube.com/watch?v=09F-Nruf_Ho
上記の映像では、台湾が中国に武力行使される心配を述べています。
今まで、中国のミサイルで台湾を標的としたもには200基程度であったが、
最近に至っては、800基にも及ぶ事を述べている。
氏は、日本と準軍事同盟を結びたいとも語っています。
私は、台湾が「チベット」の様に軍事的侵略を受けずに、平和である事を望みます。
Dear David:
回覆刪除So,"Spanish school " means one of the two modellers groups.
I see!hA~~ha~~^^
I understand what you talk about those skills.In Taiwan,we don't have any schism in model-skills.As I am,some skills learned from working,other some from other modellers by what ever,who ever,and where ever.
So,all kinds of skills merged experences by modellers.
I think that modelling is a best hobby for me,any fine skll for modelling is just good,and should to try as they merit.
If fight for model,I think that is most boredom,and also abate delight with model.
But sometimes ,some modellers on our main discussing forum also fight for model,major part for the documentations.
Hi~ masato さん
回覆刪除おはよう~ そうです,久しぶりです。最近よいか?
連合国加盟関して,私は多數の台灣人と同じだ,連合国加盟を望んです。
しかし,「台湾」と言う名称で,[中華民國]比較的によい.
あなたの支持に感謝する,台湾の友,あなたのようだ日本人でも台湾に親近感を持つ人は多い,私はこのように信じたのだ.ありがどう~
中国のミサイル関して,あれは 理知がない暴力の行為です.私は深い遺憾の意を表する.
私はあなたと同じだ,台湾も,日本も,チベットも,中国も,世界平和である事を望みます.^^
しかし,私は台灣の小い國民です.更に模型をしっかりと行うことを望む...(笑)